Call us: (+62) 21 - 5892800

DJI Naza-M V2 Flight Controller with GPS

  • $135.00
  • Ex Tax: $135.00
  • Product Code: DJI Naza-M V2
  • Availability: In Stock

Key FeaturesFor Quad, Hex- and OctocoptersSupports 9 Rotor ConfigurationsIntelligent Orientation ControlFailsafe and Auto Go HomeSupporting nine multi-rotor configurations, the Naza-M V2 Flight Controller with GPS from DJI acts as the brains of the aircraft, managing pilot input and interpreting data from the various sensors, helping maintain a stable flying condition. There ar..

Tags: DJI, DJI Naza-M V2, DJI Naza-M V2 Flight Controller, DJI Naza-M V2 Flight Controller with GPS

Key Features
  • For Quad, Hex- and Octocopters
  • Supports 9 Rotor Configurations
  • Intelligent Orientation Control
  • Failsafe and Auto Go Home


Supporting nine multi-rotor configurations, the Naza-M V2 Flight Controller with GPS from DJI acts as the brains of the aircraft, managing pilot input and interpreting data from the various sensors, helping maintain a stable flying condition. There are four components to the system. The MC (main controller) houses the flight computer and is at the heart of the flight control system. Then there is the PMU (power management unit), which serves to regulate how much power is sent to each of the four, six, or eight rotors. Next is an LED unit for status display, which features a micro-USB port for connecting the Naza-M V2 to a computer when configuring or testing using the Windows assistant software. Finally, a GPUs receiver/compass combo is included, which enables a number of features, including Intelligent Orientation Control (IOC) and the Go Home failsafe.

CAN-Bus ports on the MC allows the Naza-M to interface with a number of DJI accessories, including the Ground Station System, the iOSD Module, or a gimbal control unit (GCU).

Supports 9 Multi-rotor Configurations

Quad I, Quad X, Hex I, Hex V, Hex Y, Hex IY, Oct X, Oct I, Oct V

Supports DJI Ground Station

By adding the separately available Bluetooth Datalink to the flight control system, you can plot waypoint-based autopilot courses using an iPad app or Windows software

Software-Based Aircraft Stabilization

The system works with or without GPS, and helps keep the aircraft stable and on course by taking data from gyros and other sensors and apply it to any pilot inputs. Naza-M V2 features GPS course correction plus GPS and compass interference monitoring, which combine to prevent the aircraft drifting off course do to magnetic interference that may throw off the compass (the GPS must be enabled and properly calibrated for this feature to work)

Takeoff Assistance

Helps ensure a stable, drift-free take off even on uneven surfaces

Intelligent Orientation Control (IOC)

Because multi-rotors are virtually symmetrical, it can be easy to lose track of which end is the "front". IOC features two modes to help make flying more intuitive:
  • Core Lock: "Forward" is always the same as the direction the nose was pointing when the aircraft first took-off, regardless of the actual orientation of the aircraft
  • Home Lock: "Forward" is always away from the origin defined by the Home Point that was established during GPS calibration. In other words, "forward" will be away from the Home Point (pilot) and "back" always toward the Home Point. Moving the stick right or left will cause the aircraft to follow a circular path around the Home Point

Motor Failure Protection

If a hexrotor or octorotor equipped with a Naza-M V2 suffers a single motor failure in flight while in attitude or GPS mode, it will maintain its altitude and rotate around the stopped motor. This allows it to fly safely back to home and land

Note: This feature does not work for quadcopters

Failsafe and Auto Go Home Support

If the connection between the multi-rotor and the remote control (transmitter) are disconnected during flight, a failsafe system will activate. Provided there was enough GPS signal at the time of the disconnection, the multi-rotor will fly back to its point of takeoff and land automatically. This feature can also be triggered manually using the One-Key Go-Home function activated using Assistant software

Assistant Software for Mobile Devices

Using an iOS mobile device with Bluetooth LE support, parameters can be adjusted at any time the multi-rotor is within range. Connection records are automatically stored by the Bluetooth module and protected by password. Where Internet access is available, parameters can be automatically synchronized to the cloud and restored immediately if you switch to a different mobile device

Built-in Functions

  • Multiple autopilot control modes
  • Enhanced fail-safe
  • Low voltage protection
  • S-Bus receiver support
  • PPM receiver support
  • Independent PMU module
  • 2-axis gimbal support


In the Box

  • DJI Naza-M V2 Flight Controller with GPS
  • MC (Main Controller)
  • PMU (Power Management Unit)
  • GPS/Compass
  • LED
  • DJI CP.NZ.000011 Specs

    Supported Multi-rotorsQuad-rotor: I4, X4
    Hex-rotor: I6, X6, IY6, Y6
    Octo-rotor I8, V8, X8
    Supported ESC Output400 Hz refresh frequency
    Supported TransmittersPCM or 2.4 GHz radio with at least 4 channels
    Working RangeMC: 4.8 to 5.5 V
    VU Input: 7.4 to 26.0 V (2S to 6S LiPo recommended)
    Output(V-SEN Port Red Wire): 3 A at 5 V (burst current: 7.5 A)
    Power ConsumptionMAX: 1.5 W (0.3 A at 5 V)
    Normal: 0.6 W (0.12 A at 5V)
    Operating Temperature14 to 122°:F / -10 to 50°C
    System Requirements
    Assistant SoftwareWindows: 8, 7, XP SP3
    OS X: 10.6 or later
    Mobile: iPhone 4s, iPhone 5, iPod touch 5, iPad mini, iPad 4
    Flight Performance
    Hovering Accuracy (GPS Mode)Vertical: ±2.6' / ±0.8 m
    Horizontal: ±8.2' / ±2.5 m
    Max Angular Speed200°/s
    Max Tilt Angle35°
    Ascent/DescentAscent: 19.7 ft/s / 6 m/s
    Descent: 14.8 ft/s / 4.5 m/s
    General
    WeightMC: 1 oz / 27 g
    PMU: 1 oz / 28 g
    GPS: 1 oz / 27 g
    LED: 0.5 oz / 13 g
    DimensionsMC: 1.8 x 1.3 x 1.3" / 45.5 x 32.5 x 18.5 mm
    PMU: 1.6 x 1.1 x 0.4" / 39.5 x 27.5 x 10 mm
    GPS & Compass: 1.8 (diameter) x 0.4" / 46 (diameter) x 10 mm
    LED: 1 x 1 x 0.3" / 25 x 25 x 7.0 mm
    Packaging Info
    Package Weight0.67 lb
    Box Dimensions (LxWxH)4.95 x 3.6 x 3.1"
DJI
Parrot
Yuneec
3DR
Amimon
Autel
Blade
Drone Volt
GoPro
Hubsan
Power Vision
Walkera